This item can only be sold and shipped into the 48 contiguous states within the USA, excluding CA and FL. Additional shipping restrictions by product may apply if noted.FREE Freight on Orders Over $500.*
*Freight charges apply on orders under $500.
This Product is Non-returnable.
Please See The Shipping & Returns Policy
A low VOC solvent-based bonding adhesive.
Uses:
Used to adhere EPDM membrane to a suitable substrate (i.e. plywood, high-density fiberboard, OSB board, ISO insulation board).
Features:
- Quick drying solvent-based bonding adhesive (roughly 20 to 30 minutes depending on ambient temperature)
- Must be applied to both membrane and substrate
- Under most circumstances EPDM membrane can be walked on immediately
- High heat tolerance
- Known as "yellow glue" in the roofing industry
Cautions:
This adhesive is to be used in contact (two-sided) application method. Before joining membrane to substrate, adhesive must dry to the finger touch of tacky, but not stringy. Read caution labels on all adhesives, primer, and sealant containers. These materials contain petroleum distillates and are extremely flammable. Care MUST be taken to avoid open flames. Do not smoke when using these products. Safety data sheets (SDS) are available for these products and should be consulted. SDS can be downloaded by clicking here. Turn off all air intake systems on the roof before use. Be sure to comply with all OSHA and other safety standards while working on a roof. Be sure to stay away from overhead obstructions and power lines making sure neither your body nor equipment has contact with them. Read and follow all ladder manufacturers’ warnings and use instructions. Store in dry location away from heat and sunlight.
READ ALL CAUTIONS AND WARNINGS IN THE PRODUCT POCKET APPLICATION GUIDE PAGES 2-3.
