This item can only be sold and shipped into the 48 contiguous states within the USA, excluding CA and FL. Additional shipping restrictions by product may apply if noted.FREE Freight on Orders Over $500.*
*Freight charges apply on orders under $500.
A cured and formed white, peel & stick pipe boot for flashing applications involving stacks or vents.
Uses:
Seals pipes, stacks or vents up to 6” in diameter.
Features:
- Notched for application on pipes from 1” to 6”
- White flashing boot that is also peel and stick for easy application
- One per box with clamp included
Cautions:
Any surface this product is to be adhered to MUST first be cleaned and primed with RoofKit Seam Primer. RoofKit Seam Primer requires the use of solvent-resistant gloves. This product also requires the use of RoofKit White Membrane Caulk and Water Stop. Read caution labels on all adhesives’, primers’, and sealants’ containers. These materials contain petroleum distillates and are extremely flammable. Care MUST be taken to avoid open flames. Do not smoke when using these products. Safety data sheets (SDS), if required, are available for these products and should be consulted. SDS can be downloaded by clicking here. Turn off all air intake systems on the roof before use. Be sure to comply with all OSHA and other safety standards while working on a roof. Be sure to stay away from overhead obstructions and power lines making sure neither your body nor equipment has contact with them. Read and follow all ladder manufacturers’ warnings and use instructions. Store in dry location away from heat and sunlight.
READ ALL CAUTIONS AND WARNINGS IN THE PRODUCT POCKET APPLICATION GUIDE PAGES 2-3.
